Posted on Leave a comment

Lettie Skirt Tester Makes

Pattern testers are an integral part of the pattern development process. I greatly appreciate that people are willing to lend me their time, skills, creativity, and feedback to help me make my patterns the best they can be. Not only is the testing process helpful for me to make sure the pattern works well on a range of bodies and in different fabrics, but it also helps you when you are trying to determine your size and fabric for your own Lettie Skirt.

Below, you will find each tester’s version, including sizing info, fabric used, and any modifications made to the pattern.


Debbie | Waist: 64cm Hips: 93cm | Size B

Debbie selected her size based on her hip measurement. She used a mid-weight double-layered cotton.


Anniina | Waist: 93cm Hips: 113cm | Size J

Anniina selected her size based on her waist measurement. She used lightweight denim to make her Lettie Skirt. She shortened the length before sewing.


Erica | Waist: 25″ Hips:35″ | Size A

Erica selected her size based on her waist measurement. She made her Lettie skirt from 5 oz linen and didn’t modify the pattern.


Bean | Waist: 31″ Hip: 36.5″ | Size F

Bean selected her size based on her waist measurement. She made her version of the Lettie Skirt from chambray shirting. To fit the pattern layout on her fabric, she rotated it on the cross-grain.


Rhythm | Waist: 27″ Hips: 35″ | Size C

Rhythm selected her size based on her waist measurement. She used Ikat cotton fabric with contrasting flat piping to make her Lettie Skirt.


Christina | Waist: 110cm Hips: 146cm | Size N

Christina’s waist and hip measurements put her in two different sizes. When selecting her size, she chose the size between her waist and hip measurements. She used a lightweight cotton to make her Lettie Skirt.


Michelle | Waist: 74cm Hips: 97cm | Size F

Michelle selected her size based on her waist measurement. She used a mid-weight linen to make her skirt.


Alison | Waist: 42″ Hips: 46″ | Size K

Alison selected her size based on her waist measurement. She used viscose fabric to make her Lettie Skirt.


Katie | Waist: 29″ Hips: 37″ | Size D

Katie selected her size based on her waist measurement. She used a thrifted cotton curtain to make her skirt. Katie added 4cm of length to the skirt.


Evonne | Waist: 80cm Hips: 93cm | Size F

Evonne’s waist measurement put her between two sizes, and she chose to size down. She used cotton poplin to make her Lettie Skirt.


Emma | Waist: 38″ Hips: 46″ | Size J

Emma selected her size based on her waist measurement. She used cotton fabric to make her skirt.


Mel | Waist: 44″ Hips: 51″ | Size L

Mel selected her size based on her waist measurement and used a cotton/ramie blend twill to make her skirt.


Amanda | Waist: 104cm Hips: 128cm | Size K

Amanda selected her size based on her waist measurement. She used a mid-weight linen to make her skirt. Amanda modified the pattern layout to be able to fit within her selected fabric and she shortened the skirt by 5cm.


Jo | Waist: 48″ Hips: 56″ | Size O

Jo selected her size based on her waist measurement. She made her Lettie Skirt out of lightweight denim tencel fabric.


Alex | Waist: 35″ Hips” 42″ | Size H

Alex’s measurements put her in between sizes, so she sized down and selected the size that was the closest match. She used viscose fabric to make her skirt and shortened the skirt to her preferred length.


Belinda | Waist: 28″ Hips: 37″ | Size C

Belinda’s measurements put her in two different sizes, and she chose the size in between. She used linen fabric for her skirt.


Rakhel | Waist: 30″ Hips:45″ | Size H

Rakhel’s waist and hip measurements were 5 sizes apart. She chose the size in the middle. Rakhel used 7oz cotton denim to make her skirt.


Thank you again to the testing team! I love seeing all the versions and all the ways the Lettie Skirt can be styled. If you have any questions when selecting your size, please don’t hesitate to reach out – emily@goldfinch.limited. I would love to see your version, too! If you post to IG remember to tag @goldfinchtextilestudio and use hashtags #LettieSkirt and #GoldfinchLettieSkirt.

Happy Sewing!

Posted on Leave a comment

Lettie Skirt Fabric Selection and Notions

Let’s get ready to make your Lettie Skirt! Beyond selecting your size, one of the first decisions you must make is what fabric you want to make your skirt out of. The Lettie Skirt is suitable for various fabric types, from light-weight viscose to mid-weight denim.

When selecting your fabric, one of the first things to consider is your experience with zero-waste pattern cutting. Stable fabrics with more structure, such as cotton, will be significantly easier to cut out than shifty fabrics like silk or rayon. The fabric’s weight and drape will also affect your skirt’s overall structure. Fabrics with more drape will create a more fluid, swishy skirt and fabrics with more structure will have more volume around your body and show the shape of the skirt.

Another thing to consider when selecting your fabric is directional print or nap. Due to the zero-waste pattern layout, the skirt panels are oriented in the upright and inverse positions. If you use a fabric with a directional print or nap, 3 of the skirt panels will be upside down.

I used Vanilla Herringbone Handloom Cotton from Loom and Stars for my final sample. This fabric is a dream to work with – easy to cut out and sew and is oh-so-soft. At only 43″ wide, I adjusted my pattern layout to fit (guidance is included in the instruction booklet for making these types of adjustments). The fabric is not 100% opaque, and depending on the light, the pockets can sometimes be seen, but it’s nothing a slip couldn’t fix. You may consider eliminating the pockets if your fabric is lightweight or not 100% opaque.

Another favorite of mine is Washed Hemp from Lyrical Fabrics. This fabric has both structure and drape, similar to linen. It makes for a great everyday skirt that can easily be dressed up if needed. This fabric is a little shifty so takes a little more consideration when cutting, but overall not too difficult.

My pattern testers used a variety of fabrics: linen, ikat, Tencel cotton, chambray, etc. Each one turned out beautifully!

Notions

After you select your fabric, you will need to gather your notions. The construction of the Lettie Skirt calls for a few materials you may not be familiar with or are not readily available at your local fabric store. The front waistband is interfaced with non-roll, non-fusible waistband interfacing, such as Ban-rol. This type of interfacing allows the waistband to move and bend with your body without collapsing, folding over, and wrinkling. The elastic in the back of the waistband is 1 1/2″ (3.8cm) wide, heavy, non-roll elastic. You want an elastic that will not fold over to the strain of being stretched. Finally, the partial button placket is finished with two different-sized buttons. The main part of the placket uses 1/2 “(12mm) buttons, and the waistband is secured with a 3/4 “-1” (19-25mm) button. These buttons can match, or a contrasting button could be used on the waistband.

Below, you will find additional information and resources on where to find these materials:

Interfacing:

If you can’t find Ban-rol (or non-roll, non-fusible mono-filament waistband stabilizer) at your local fabric store, it can be purchased online, in bulk, or by the yard. If you prefer not to use this type of interfacing, then un-stretched elastic can be used as a substitute.

Below you will find some online shops that sell Ban-rol. This is not an extensive list, just a starting point. If you purchase from a shop not listed, let me know as I would love to expand the list.

USA:

Canada:

UK:

Australia:

Elastic:

Not all elastic is created equal. When selecting elastic for your Lettie Skirt, you want to select a non-roll elastic that will retain its shape when stretched. This will make a big difference in the feel and look of the back waistband of your Lettie Skirt.

Below you will find some online shops that sell non-roll elastic. Again, this is not an extensive list, just a starting point.

USA:

Canada:

UK:

Australia:


If you have any questions about fabric selection or notions while planning your Lettie Skirt, please don’t hesitate to contact me – emily@goldfinch.limited.

Posted on Leave a comment

Introducing the Lettie Skirt

As a person who has rarely worn skirts in the past, it surprises me that I have become a full-on skirt convert. Maybe it’s always been the type of skirt that has kept me from wearing them much. I’ve never been drawn to gathered, tiered skirts that have been popular over the years and are so easy to make. I always feel like I have too much fabric at my waist and never feel quite like myself in those styles. But this past spring, I strongly desired to design a skirt. I wanted it to be something I felt like myself in – a skirt for pants people, a versatile piece to be worn and styled in multiple ways.

And now, after months of work, many samples, and lots of skirt-wearing, I’m pleased to introduce you to the Lettie Skirt, a minimal-waste six-panel skirt. The Lettie Skirt is a midi-length six-panel skirt featuring a partial button placket with integrated buttonholes, an elastic back, and flat piping details. The skirt’s design creates a versatile, everyday staple with subtle details that elevate the garment. 

The Lettie Skirt PDF pattern comes with three different pattern files – printable pattern layouts (print-at-home and copyshop/A0), dimensioned pattern layouts to draft directly to the fabric, and projector files – along with a detailed instruction booklet. There are 20 sizes, ranging from waist: 25”-58” (63.5-147.3cm) and hip: 33”-66” (83.8-167.6cm).

During the design development phase of the Lettie Skirt, I spent a lot of time looking at inspo photos on Pinterest. I was searching for a feeling – a vibe of a skirt and outfit – not necessarily an exact silhouette to put my spin on. I wanted something that was not overly feminine – again, a skirt for pants people. I wanted to feel the same ease I feel when wearing this skirt as I do when wearing my favorite pair of pants. I also knew I wanted the skirt to be something that could be worn just as easily with a tee shirt and tennis shoes as it could with a button-up and loafers.

After establishing a general idea for the zero-waste pattern layout, it became time to think about the details. And the Lettie Skirt is all about the details – flat piping, integrated buttonholes on the partial button placket, front pleats, and a front slit – all with clean interior finishes.

I’ve been drawn to the idea of integrated buttonholes for a long time. I love the idea that they are built into the garment. I knew that to include something like this in the skirt’s design, I would need elements that the integrated buttonholes could be sewn into. That is where the flat piping comes in. Not only does it provide texture and visual interest to the skirt, but it is an integral part of the buttonhole construction.

These buttonholes are the most complicated part of the construction process (video tutorial). I sewed many samples to determine the best way to integrate functioning buttonholes into the seamline. Every time I sew up a sample, I get a little thrill that the process actually works.

The Lettie Skirt is a slow and satisfying sewing project. The construction details and clean finished seams come together to make a beautifully finished garment. My samples have become wardrobe staples that can be styled in a multitude of ways. This summer that has entailed a tee shirt and tennis shoes, but with cooler weather approaching, I’m looking forward to exploring the new styling options.

I’m looking forward to seeing more Lettie Skirts out in the world. Use the hashtags #LettieSkirt and #GoldfinchLettieSkirt and tag me @goldfinchtextilestudio if you post to social media. If you have any questions about the Lettie Skirt, please don’t hesitate to reach out to me – emily@goldfinch.limited.

Happy sewing!