Category: Lawrence Top

Posted on by — Leave a comment

Lawrence Top Dress Hack

I have been thinking about making a dress version of the Lawrence Top for a while. I began with the idea of lengthening the tunic version and adding a wide ruffle at the bottom. I did the math, adjusted the pattern pieces, and selected fabric, but something was holding me back. The more I thought about my idea, the more I realized I couldn’t see myself wearing the final version. I loved the idea, but the design didn’t fit my wardrobe or lifestyle. I love the look of ruffles and frills, but I don’t necessarily like wearing them. I didn’t want to make something that I would only wear once or twice.

I put the idea on hold for a bit while I tried to decide what direction to go with it. When I found a piece of navy double gauze in my stash, my motivation for making a dress was renewed. I decided to blend the two views of the Lawrence Top and make an oversized shirt dress with a tie.

As I looked at the original pattern, I tried to think about what aspects of each view I wanted to use in the hacked dress. I wanted to use the shape and inseam pockets of the tunic version, but with shorter sleeves that could be rolled up if I wanted a different look. I also knew I wanted to incorporate the split hem from View B, but I wanted the hemline to be even.

Once I started laying out all the pieces on my fabric, I was able to work on more specific details of the design. My piece of fabric was 59″|150cm wide x 90″|229cm long. I began by switching the orientation of the original pattern pieces (to be oriented with the grain instead of cross-grain) so I could get more length. Based on the length of fabric I was able to get a dress that hits above the knee.

Adjusted pattern piece layout

I also wanted a little more volume to the dress, so I made the front and back panels wider. I didn’t change the width of the yoke and I was able to gather the panels more. I did make the yoke taller – making it 9”|23cm instead of 6”|15cm – to go with the proportions of the more oversized look.

The buttons are one of my favorite parts of the dress. I found these yellow, vintage buttons last summer and when I got them I had no project in mind. I just loved how all the different shades of yellow and different shapes went together. Once I started sewing the navy gauze, I remembered that I had the yellow buttons and I knew they would be the perfect fit for the dress. I love how they pop on the navy fabric and add a bit of whimsy to the dress.

While I was making the dress, I thought about various ways that it could be worn. I wanted to make sure that it worked in a variety of situations and seasons. The dress definitely feels fancier when it is tied at the waist, but it can also have a casual feel. I like how it feels flexible in its style. The dress layers well over leggings and it can be worn in the cooler months. And I discovered (after we took these pictures, of course) that it layers well over wide-leg culottes. Worn without the tie, it creates a very artist smock vibe which I really like. Wearing it untied, without pants, is also an option. I think it will be great to throw over my swimsuit when we head to the beach.

If you have made the Lawrence Top and/or tried hacking the pattern I would love to hear about it. Leave a comment or post and tag me on Instagram @goldfinch.limited #zwlawrencetop. I love seeing everyone’s makes!

Posted on by — Leave a comment

Hack: Patchy Cropped Lawrence Top

When my friend Jamie (@reclaimedcraft) asked if I was interested in some fabric cutoffs from her time working at Elizabeth Suzann, I jumped at the chance. I have a never-ending supply of fabric scraps, but the opportunity to use high-quality fabric is hard for me to turn down. I have a couple of idea swimming through my head of what I will be doing with these scraps, but my first desire was to create a patchy, cropped Lawrence Top.

Upon opening the boxes of scraps, I was immediately drawn to the olive linen. I had visions of a monochromatic top with a few pops of contrast. The navy linen was the perfect pairing with the olive. I began by sorting and ironing out the scraps. The next step was to straighten all the edges. In the past, I have tried to work the various curves and diagonal cuts into the finished whole cloth, but for this project, I wanted to work with only the straight lines. I now have a pile of smaller cutoffs, but I have a few ideas running through my head about what to do with those.

Once the fabric had been prepped, the fun part could begin. Based on the amount of scraps I had, I decided to make some changes to a few elements of the design. First, I used a large inverted box pleat on the back panel instead of smaller pleats or gathers. When working with all the seams of the patchwork, it can sometimes be a little tricky to get the fabric to drape well so I wanted to eliminate a bunch of pleats/gathers that might interfere with how the fabric hangs. I also decided to anchor the pleat 1″ down from the yoke to create a more dramatic effect.

For the front panels, I decided to make them the same width as the yoke and eliminate the pleats/gather all together. There is still plenty of ease for me, but if I had been making the tunic version I probably would have stuck to the original dimensions. The only other change that I made to the pattern was using snaps instead of buttons. I really like that clean finish of the button band. Once you have an understanding of how the pieces come together, it is easy to make adjustments that work for your body and the fabric you have.

The process of piecing the fabric together is simple but does take some time. Once I got into a rhythm, it went pretty quickly. I find that it is helpful to layout some fabric pieces and have a general idea of how one section might go together. For example, if I know I need to have a finished piece of 12″ X 22″, I will see what pieces I have that fit within those dimensions and see how they layout. I attempt to have a bit of a game plan before I get sewing.

To begin the patchwork, I first sew my fabric pieces together and trim any excess fabric. I then finish the raw edge with a zigzag stitch. Next, press the seam to one side and topstitch the seam in place. I continue on like this, building the piece of fabric to the desired dimensions. Once I have the size I need, I treat it just like a pattern piece and sew everything together.

Working through this process is time-consuming, but also very rewarding. This top was created from waste and it feels good to be able to make something fun and beautiful with these leftovers. By using the Lawrence Top pattern as a guide, I hope to make more patchwork tops – maybe something with more color/pattern mixing.

Thank you again, Jamie, for taking the time to save the scraps, sort them and send them my way. If you have any questions about this process or the pattern please don’t hesitate to email me – emily@goldfinch.limited. If you try this process or any other hacks, I would love to see your final top. Email me photos or post on Instagram using #zwlawrencetop and #goldfinchlimited.

Posted on by — Leave a comment

Lawrence Top Tester Recap

I wanted to put together a special post to highlight my testers final garments. I would not have been able to complete the Lawrence Top sewing pattern without their wonderful help. I really enjoyed working with these women and seeing their finished garments makes me very happy. Thank you again for all your help!

What is great about the pattern is it’s versatility; not only in how you wear the garment, but also how it can work with different types and sizes of fabric. Seeing all the tester versions next to each other really highlights how flexible this pattern is.

Andrea made View B in a lightweight viscose from her stash. Due to the size of the fabric, she didn’t make the low/high hemline. She also used a different piece of lightweight fabric for the interior yoke. Both of these mods are great places to change up the pattern if you have less fabric than recommended. If you click through on her post, you can see her pattern pieces all cut and laid out, along with the very minimal waste she has when finished.

Eli made View A in a more structured gingham cotton. I love how she styled the top in a variety of ways; over jeans, layered with a cozy scarf, and open as a jacket/cardigan. I really enjoy wearing oversized button-up shirts over tank tops, so this will definitely be my go to way to wear the tunic this spring.

Sarah made View A in viscose rayon. She used a wide cut of fabric and was able to lay out her pattern pieces with the fabric grain, as apposed to cross-grain that the pattern calls for. The top is wonderfully drapey and looks good open or closed.

Rebecca made View A in a crisp, white linen. Rebecca styles the tunic with and without a turtleneck showing that the top can be worn throughout many seasons. Rebecca has plans to make another tunic, but making it a bit narrower by adjusting the width of the front and back panels. She also mentioned the idea of modding the pattern into a dress and now I’ve been thinking about ways to make one for myself.

Rose made View B out of a beautiful piece of linen. She made size 2 as her bust size fits right on the lower end of the size range. I love how she styled the cropped top with cozy linen pants. I can’t wait to see her tunic version.

Michelle (@zoetemeyer) made View A in a drapey rayon. Due to the size of fabric she had, she rearranged the pattern pieces and ended up making a longer, narrower version of the top, with a low/high split hemline. She also omitted the seam facing details and instead used this leftover fabric to test her buttonholes. It’s nice to see how she took the pattern pieces and moved them all around the fabric she had to make it work.

Elana (@the_solstice_studio) made a View B of the top. She had a lot of wonderful ideas to mod/hack the pattern: “I thought of a number of ways to use excess fabric or mistakes to keep the top zero waste including ruffles, a tied bow at the front, sleeve details, making an even longer top that’s actually a dress (I fantasized about a dress version of option B the entire time I worked on it, cinched at the waist with a ribbon made from excess fabric or a belt), or even longer sleeves for a winter version of option B.”

Thank you again to my testers! I hope seeing these finished tops gives everyone some inspiration and I look forward to seeing many more finished Lawrence Tops. I would love to see not only your finished garment, but also your process – post on Instagram using #zwlawrencetop and #goldfinchlimited.

Posted on by — Leave a comment

Lawrence Top – Side Seam Facings for View B

During the testing phase for the Lawrence Top a few people suggested that I include photos to show how the side seam facings are sewn. This is a technique that is not used often so there is not a ton of visual reference to be found.

I photographed a step-by-step tutorial to show how the side seams facings are sewn into the top. While this tutorial is specific to View B, the concept can be applied to the single seam facing for View A.

While designing the Lawrence Top, I wanted to find uses for all the fabric cutoffs to make the design zero waste. The neckline cutouts are perfect for seam facings and create a nice finished look. For View B of the top, the split seams required 2 sets of facings. While working through the pattern piece layout I needed to plan accordingly to accommodate for both sets of facings.

Originally, I had planned for two sets of triangles to be the seam facings at the split seam. During my testing, I discovered that my triangles for the second set of seam facings were not mirrored images of themselves like facings created from the neckline cutout. This created a problem if you are using a fabric that has a definite “right” and “wrong” side. So I adjusted and made the facings into rectangles. In the end, it creates an interesting design detail and finishes the seams nicely.

I hope this tutorial is helpful when putting in the side seam facings. Please don’t hesitate to reach out if you have further questions –  emily@goldfinch.limited

Posted on by — Leave a comment

Introducing the Lawrence Top

I’m very excited to introduce you to the Lawrence Top, a zero waste PDF sewing pattern. The Lawrence Top comes in two different views. View A is a tunic length top with 3/4 length sleeves and inseam pockets. View B is a cropped top with a low/high hem, short sleeves and patch pockets. The top is designed to have an oversized fit and comes in two size ranges.

Size 1 has a finished bust circumference of 58″/147cm and is intended to fit bust of 32″-44″/81cm-112cm.

Size 2 has a finished bust circumference of 70″/178cm and is intended to fit a bust of 46″-56″/117cm-142cm.

Shop Now

The inspiration for the Lawrence Top began with a thrifted ready-to-wear top that I picked up a few years ago. The shirt is a short sleeved, button up tunic with a large overlapping pleat in the back. While the shirt is not necessarily ground breaking in style, it is definitely a staple in my wardrobe. I love how easy it is to wear a variety of ways.

I’ve been dreaming of ways to recreate this top and I knew I wanted to include a yoke and pleats, but I also wanted pockets and some sleeve options. Most of these thoughts stayed in my head for quite awhile. Ideas and thoughts about pleat placement, etc. would come to me at random, but acting on these ideas took some time.

After seeing some examples of zero waste sewing patterns, I finally took the plunge and got to work on my own design. When I started the process, I decided on a fabric size to be the base of the design. I wanted to use a fabric size that was a standard width and length, but I also wanted the design to be flexible enough to work even if the fabric dimensions were off by a few inches/cm.

Much of the design process involved moving and adjusting the puzzle pieces to fit within the fabric dimensions. I began to see the pattern as more of a concept, or a formula, that could be changed and adjusted to meet the sewist needs. Do you want it smaller or bigger? Longer or shorter? Not a problem – some quick adjustments to the fabric dimensions and you can make a garment that suits your needs. Throughout the pattern, I hope to provide the tools necessary to make any needed changes.

The pattern is different than your typical home sewing pattern. The pattern is based on only squares, rectangles and triangles. The cutlines are be drawn directly on the fabric using the provided pattern layout and dimensions. Printing out pattern pieces is not required for this process so there is no paper waste or taping required.

The Lawrence Top is designed to be zero waste, meaning all of the required fabric is used. This is achieved by using the cutoffs to create interesting finishing details. The neckline cutouts become a yoke facing, a hang loop and seam facings. While these details are technically optional, they lend to a nicely finished garment.

Detail of yoke facing and hang loop

While designing the Lawrence Top, I thought about different ways it could be worn throughout the seasons and in various ways in your wardrobe. The tunic can be worn with leggings or jeans, open as a cardigan, or over a turtleneck. The cropped top can be worn with high waisted pants and skirts, over a dress, with a cardigan, or over a turtleneck. There are many possibilities to make each top wearable in a variety of ways.

Over the next few months I have plans to show you a few ways the pattern can be hacked, along with additional ways to style the Lawrence Top. My hope is that this top brings many options and creativity to your closet.

Shop Now