Posted on Leave a comment

Lawrence Top – Side Seam Facings for View B

During the testing phase for the Lawrence Top a few people suggested that I include photos to show how the side seam facings are sewn. This is a technique that is not used often so there is not a ton of visual reference to be found.

I photographed a step-by-step tutorial to show how the side seams facings are sewn into the top. While this tutorial is specific to View B, the concept can be applied to the single seam facing for View A.

While designing the Lawrence Top, I wanted to find uses for all the fabric cutoffs to make the design zero waste. The neckline cutouts are perfect for seam facings and create a nice finished look. For View B of the top, the split seams required 2 sets of facings. While working through the pattern piece layout I needed to plan accordingly to accommodate for both sets of facings.

Originally, I had planned for two sets of triangles to be the seam facings at the split seam. During my testing, I discovered that my triangles for the second set of seam facings were not mirrored images of themselves like facings created from the neckline cutout. This created a problem if you are using a fabric that has a definite “right” and “wrong” side. So I adjusted and made the facings into rectangles. In the end, it creates an interesting design detail and finishes the seams nicely.

I hope this tutorial is helpful when putting in the side seam facings. Please don’t hesitate to reach out if you have further questions –  emily@goldfinch.limited

Leave a Reply

Your email address will not be published.