Posted on 3 Comments

Xanthea Zero Waste T-Shirt

Liz Hayward from The Craft of Clothes recently released a zero-waste t-shirt pattern – the Xanthea Top. Liz proposed a pattern swap with our latest patterns, as t-shirts and overalls are a perfect combo. I’m not quite done with the Simone Overalls pattern, but I’m looking forward to styling the Xanthea Top with my finished overalls and seeing Liz’s version of both together. It was also perfect timing, as I have been wanting to make some basics for myself and tees were first on my list.

The Xanthea Top is very versatile, as it is designed to be used with knit or woven fabrics and it is drafted up to a 70″ bust. The top has a fun, unique construction, and a slightly boxy fit. The final top hangs on the bias so it has a nice drape. It also has options for short sleeves or long sleeves. Liz provides a printable mockup of the top so you can fully understand the construction before you get started.

Short-sleeved version with neckline for knit fabric
Long Sleeve version with neckline for woven fabric

I decided I wanted to play with and highlight the unique design lines created on the front of the top. It has been a while since I made a handstitched garment so I was excited to jump in again with the Xanthea top. My goal was to use mock flat-felled seams for the body and finish the neckline with a more stretchable stitch. I made a few minor changes to the overall design; including using the woven neckline for the knit version, omitting the sleeves, and taking out a bit at the shoulders.

I made a size 10 based on my body measurements and I’m very happy with the fit. I also made a version out of woven fabric in the same size and while it does fit, I think I may size up for future versions made with woven fabric as it does pull a bit in the shoulder area when I cross my arms. I’m not sure if this is because of my fabric choice or the size, but I will experiment with that further.

The original pattern does not have shoulder seams, but I decided to slightly modify my top by taking out 1.5″ | 3.8cm from the top of the shoulders. To do this, I constructed the top as directed until I got to the step to cut out the neckline. I traced my desired neckline on the fabric and then I measured down 1.5″ | 3.8cm at the side fold (there is no side seam). I made a diagonal cut from this point up to the neckline. I was left with a triangle cutout that I used to create a facing around the armholes.

I also chose to use the woven neckline for the top because I wanted a lower neckline. When I cut out the pattern, I cut an additional 1″ |2.5cm strip the same length as the required square. I used this strip as the binding around the neckline. I did have a little bit of this strip remaining and I used this to help finish the facing at the armholes. I used the neckline cutout as a back facing and I really like the detail on the back of the shirt.

The last thing that I changed was to eliminate the sleeves for my knit version because the boxy fit creates cute little cap-like sleeves. As I said above, I used the excess that was cut off the shoulders as the facing for the sleeves. Because there are no shoulder seams, the excess triangle that I cut from the shoulders needed to be cut open so that I could stitch it to the arm opening. I matched the center of this elongated polygon with the top shoulder seam, right sides together, and stitched it to the arm opening. I finished the facing by turning it to the wrong side and stitching around the perimeter of the armhole and along the diagonal edges of the shoulder cutout. I wish I had gotten better pictures of this process because it is a bit hard to describe, but the video I recorded while doing it was blurry – oh well. I am really pleased with how this detail turned out and how it compliments the original design lines of the top.

As the weather cools, I’m looking forward to making more versions of the Xanthea Top. I have plans for a woven version with slightly puffy sleeves and I also like Liz’s idea of making it a sweatshirt with a hood. This is definitely a pattern that I will be coming back to often. Please let me know if you have any questions about my mods.

3 thoughts on “Xanthea Zero Waste T-Shirt

  1. Wow! A beautifully made top with some interesting and lovely mods.
    Thanks so much for making one and I’m really looking forward to making your overalls (and wearing them together).

    1. Thank you! It’s such a fun design and a pleasure to sew.

  2. […] We met on Instagram, and she was writing the overalls pattern as I was doing the Xanthea top. I suggested we do a pattern swap, since overalls and t-shirts go well together. Xanthea was ready first and Emily handstitched a sleeveless version. […]

Leave a Reply to Emily Klug Cancel reply

Your email address will not be published. Required fields are marked *