Posted on Leave a comment

Hack: Patchy Cropped Lawrence Top

When my friend Jamie (@reclaimedcraft) asked if I was interested in some fabric cutoffs from her time working at Elizabeth Suzann, I jumped at the chance. I have a never-ending supply of fabric scraps, but the opportunity to use high-quality fabric is hard for me to turn down. I have a couple of idea swimming through my head of what I will be doing with these scraps, but my first desire was to create a patchy, cropped Lawrence Top.

Upon opening the boxes of scraps, I was immediately drawn to the olive linen. I had visions of a monochromatic top with a few pops of contrast. The navy linen was the perfect pairing with the olive. I began by sorting and ironing out the scraps. The next step was to straighten all the edges. In the past, I have tried to work the various curves and diagonal cuts into the finished whole cloth, but for this project, I wanted to work with only the straight lines. I now have a pile of smaller cutoffs, but I have a few ideas running through my head about what to do with those.

Once the fabric had been prepped, the fun part could begin. Based on the amount of scraps I had, I decided to make some changes to a few elements of the design. First, I used a large inverted box pleat on the back panel instead of smaller pleats or gathers. When working with all the seams of the patchwork, it can sometimes be a little tricky to get the fabric to drape well so I wanted to eliminate a bunch of pleats/gathers that might interfere with how the fabric hangs. I also decided to anchor the pleat 1″ down from the yoke to create a more dramatic effect.

For the front panels, I decided to make them the same width as the yoke and eliminate the pleats/gather all together. There is still plenty of ease for me, but if I had been making the tunic version I probably would have stuck to the original dimensions. The only other change that I made to the pattern was using snaps instead of buttons. I really like that clean finish of the button band. Once you have an understanding of how the pieces come together, it is easy to make adjustments that work for your body and the fabric you have.

The process of piecing the fabric together is simple but does take some time. Once I got into a rhythm, it went pretty quickly. I find that it is helpful to layout some fabric pieces and have a general idea of how one section might go together. For example, if I know I need to have a finished piece of 12″ X 22″, I will see what pieces I have that fit within those dimensions and see how they layout. I attempt to have a bit of a game plan before I get sewing.

To begin the patchwork, I first sew my fabric pieces together and trim any excess fabric. I then finish the raw edge with a zigzag stitch. Next, press the seam to one side and topstitch the seam in place. I continue on like this, building the piece of fabric to the desired dimensions. Once I have the size I need, I treat it just like a pattern piece and sew everything together.

Working through this process is time-consuming, but also very rewarding. This top was created from waste and it feels good to be able to make something fun and beautiful with these leftovers. By using the Lawrence Top pattern as a guide, I hope to make more patchwork tops – maybe something with more color/pattern mixing.

Thank you again, Jamie, for taking the time to save the scraps, sort them and send them my way. If you have any questions about this process or the pattern please don’t hesitate to email me – emily@goldfinch.limited. If you try this process or any other hacks, I would love to see your final top. Email me photos or post on Instagram using #zwlawrencetop and #goldfinchlimited.

Leave a Reply

Your email address will not be published. Required fields are marked *