Posted on Leave a comment

Introducing the Lawrence Top

I’m very excited to introduce you to the Lawrence Top, a zero waste PDF sewing pattern. The Lawrence Top comes in two different views. View A is a tunic length top with 3/4 length sleeves and inseam pockets. View B is a cropped top with a low/high hem, short sleeves and patch pockets. The top is designed to have an oversized fit and comes in two size ranges.

Size 1 has a finished bust circumference of 58″/147cm and is intended to fit bust of 32″-44″/81cm-112cm.

Size 2 has a finished bust circumference of 70″/178cm and is intended to fit a bust of 46″-56″/117cm-142cm.

The inspiration for the Lawrence Top began with a thrifted ready-to-wear top that I picked up a few years ago. The shirt is a short sleeved, button up tunic with a large overlapping pleat in the back. While the shirt is not necessarily ground breaking in style, it is definitely a staple in my wardrobe. I love how easy it is to wear a variety of ways.

I’ve been dreaming of ways to recreate this top and I knew I wanted to include a yoke and pleats, but I also wanted pockets and some sleeve options. Most of these thoughts stayed in my head for quite awhile. Ideas and thoughts about pleat placement, etc. would come to me at random, but acting on these ideas took some time.

After seeing some examples of zero waste sewing patterns, I finally took the plunge and got to work on my own design. When I started the process, I decided on a fabric size to be the base of the design. I wanted to use a fabric size that was a standard width and length, but I also wanted the design to be flexible enough to work even if the fabric dimensions were off by a few inches/cm.

Much of the design process involved moving and adjusting the puzzle pieces to fit within the fabric dimensions. I began to see the pattern as more of a concept, or a formula, that could be changed and adjusted to meet the sewist needs. Do you want it smaller or bigger? Longer or shorter? Not a problem – some quick adjustments to the fabric dimensions and you can make a garment that suits your needs. Throughout the pattern, I hope to provide the tools necessary to make any needed changes.

The pattern is different than your typical home sewing pattern. The pattern is based on only squares, rectangles and triangles. The cutlines are be drawn directly on the fabric using the provided pattern layout and dimensions. Printing out pattern pieces is not required for this process so there is no paper waste or taping required.

The Lawrence Top is designed to be zero waste, meaning all of the required fabric is used. This is achieved by using the cutoffs to create interesting finishing details. The neckline cutouts become a yoke facing, a hang loop and seam facings. While these details are technically optional, they lend to a nicely finished garment.

Detail of yoke facing and hang loop

While designing the Lawrence Top, I thought about different ways it could be worn throughout the seasons and in various ways in your wardrobe. The tunic can be worn with leggings or jeans, open as a cardigan, or over a turtleneck. The cropped top can be worn with high waisted pants and skirts, over a dress, with a cardigan, or over a turtleneck. There are many possibilities to make each top wearable in a variety of ways.

Over the next few months I have plans to show you a few ways the pattern can be hacked, along with additional ways to style the Lawrence Top. My hope is that this top brings many options and creativity to your closet.

Leave a Reply

Your email address will not be published. Required fields are marked *